(647) 254-0877Get Estimate
Home/Cost Guides/Sump Pump Installation
Cost Guide · Updated June 2026

How Much Does Sump Pump Installation Cost in Toronto? (2026 Prices)

Quick answer — starting price
From $1,700
Most Toronto projects: $1,400 – $9,000 · $1,700 – $4,000 for a typical residential installation
About 13% above our Mississauga base rate: 3% for travel (20–40 km from Mississauga) plus 10% for access, parking and permit handling in a denser city. Elsewhere in the GTA, from $1,500.
Get my written price

* Starting price for a straightforward job with clear access adjusted for Toronto, before HST. Minimum project $3,000. Permits billed at cost. Your written estimate is free.

Sump pump installation in Toronto typically costs $1,200 to $4,500 for a basic single pump installed in an existing pit, $2,500 to $6,500 for installation plus a new sump pit (concrete cut), and $4,000 to $8,000+ for premium systems with battery backup, water-powered backup, and high-capacity primary pumps. The big cost drivers are whether a pit already exists, what backup systems you include, and whether you're tying into an existing waterproofing system. Toronto's older neighbourhoods often need a new pit installed; newer suburban builds usually have one ready.

Material options & pricing

What you'll pay by material

MaterialCost for a typical residential installationLifespanProsCons
Single Pump Replacement (existing pit)$1,200 – $2,500 installed8–12 years
  • Fastest install — typically 2–4 hours
  • Lowest cost when an existing pit is functional
  • Minimal disruption to finished basement
  • Wide selection of reliable Canadian-made pumps
  • –No backup — single point of failure if pump fails or power goes out
  • –Doesn't address underlying drainage issues
  • –Existing pit may be too small for modern pump capacity
Pump + Battery Backup$2,000 – $4,500 installed8–12 years (pump) + 5–7 years (battery)
  • Protection during power outages (the time pumps are needed most)
  • Automatic switchover — no homeowner action required
  • Many systems include smart monitoring / app alerts
  • Insurance discount on some policies
  • –Battery needs replacement every 5–7 years
  • –Backup pump usually has lower capacity than primary
  • –Battery system requires nearby outlet and ventilation
Pump + Water-Powered Backup$3,000 – $6,500 installed8–12 years (pump) + 15+ years (water-powered)
  • Backup runs as long as municipal water pressure exists
  • No battery to replace — fewer moving parts on the backup
  • Best long-term protection for areas with frequent power outages
  • –Uses municipal water during operation (4–8 gallons per gallon pumped)
  • –Requires a dedicated water service line
  • –Higher install cost than battery backup
New Sump Pit + Pump + Backup (full system)$4,500 – $8,000 installed15–20 years (pit) + 8–12 (pump)
  • Complete system designed for the specific basement
  • Concrete saw-cut and pit installation included
  • Properly sized pit (18" or 24" diameter) for modern pump capacity
  • Required for basements that don't already have one
  • –Highest cost of all scenarios
  • –Concrete cutting creates significant dust + debris
  • –Cement curing time means 2–3 days before pump is fully operational

Ranges reflect typical GTA Q1 2026 rates and assume standard access. Every Buildoreno estimate is a free, itemized written quote.

What moves the needle

What affects the price?

Every project is different — these are the biggest factors that move your final number.

Existing Pit Condition

If an existing pit is in good condition and properly sized, install is fast and cheap. If the pit is too small (older 14" pits), undersized for modern pumps, or damaged, replacement adds $1,500–$3,500.

Pump Quality and Capacity

Budget pumps (1/3 HP): $200–$400 hardware cost. Mid-grade (1/2 HP cast iron): $400–$700. Premium (3/4 HP commercial-grade): $700–$1,200. Higher capacity matters for chronic-water basements.

Backup System Type

Battery backup: $800–$2,000 added. Water-powered backup: $1,500–$3,500 added. WiFi smart monitoring: $200–$600 added. Combined battery + water-powered: $2,500–$5,000 added.

Discharge Line

Existing discharge in good condition: minimal cost. New discharge through exterior wall + frost-resistant line + termination: $400–$1,500. Discharge to storm sewer (some cities require this): $800–$2,500.

Electrical Work

Existing dedicated GFCI outlet: included. New dedicated 15A circuit required: $400–$900 added. Generator-ready transfer switch wiring: $600–$1,500 added.

Don't forget these

Hidden costs to budget for

The line items homeowners most often forget — we itemize every one of these up front.

Concrete Saw-Cutting (new pit)$800 – $2,000
New Discharge Line through Wall$400 – $1,500
Dedicated GFCI Electrical Circuit$400 – $900
Battery Replacement (every 5–7 yr)$200 – $400
Pit Cleanout / Service Visit$150 – $350 / yr
Generator Transfer Switch (optional)$600 – $1,500
Typical GTA projects

What common projects cost

Typical pricing for common project sizes, priced for the city named on each card. Plus HST; permits billed at cost. Your written estimate is free.

Replace failed pump in existing 18" pitToronto
$2,000 – $3,200

Replace 1/3 HP pump with new 1/2 HP cast iron. Add battery backup. Test discharge. 3-hour install.

New sump pit + pump + battery backupMississauga
$3,500 – $5,500

Concrete saw-cut, 24" pit installation, 3/4 HP primary pump, battery backup, new discharge line. 2-day install.

Premium dual-pump + water-powered backupVaughan
$5,700 – $8,200

New 24" pit, premium 3/4 HP primary, water-powered backup, smart monitoring. Includes upgraded electrical and dedicated water line.

Reviewed by Patrick Grygoruk · Owner & Project Manager

25+ years in GTA exterior renovation · Ontario-registered contractor · WSIB-covered · permits managed for you. Meet the team

Honest answers

Sump Pump Installation cost — questions answered

Sump pump installation in Toronto typically costs $1,200 to $4,500 for a basic single pump installed in an existing pit, $2,500 to $6,500 for installation plus a new sump pit (concrete cut), and $4,000 to $8,000+ for premium systems with battery backup, water-powered backup, and high-capacity primary pumps. The big cost drivers are whether a pit already exists, what backup systems you include, and whether you're tying into an existing waterproofing system. Toronto's older neighbourhoods often need a new pit installed; newer suburban builds usually have one ready.

Most GTA projects range from $1,500 – $3,500 for a typical residential installation. The exact price depends on material choice, project complexity, and site conditions. We provide detailed written quotes so you know exactly what you are paying for.

Yes. Concrete Saw-Cutting (new pit) typically runs $800 – $2,000 and is commonly overlooked. We include transparent line items in every estimate so there are no surprises on your final invoice.

Yes. New Discharge Line through Wall typically runs $400 – $1,500 and is commonly overlooked. We include transparent line items in every estimate so there are no surprises on your final invoice.

Yes. Dedicated GFCI Electrical Circuit typically runs $400 – $900 and is commonly overlooked. We include transparent line items in every estimate so there are no surprises on your final invoice.

Current offers
Prefer to talk? Call +1 647-254-0877
From $300/lin ft

Basement underpinning from $300 per linear foot

Engineered, permitted and City-inspected at every stage. Pay as each phase passes inspection.

* Starting rate for a 2 ft lower on a straightforward foundation with clear access. Depth, soil and shared walls are priced from your inspection. Our minimum project is $3,000. Plus HST; permits billed at cost. Engineering billed at cost unless you bring your own engineer.

Book an inspection →
Credited back

$400 basement inspection, credited back when you hire us

We measure the ceiling height and footings and tell you in writing whether you need underpinning, bench footing or neither — and what each would cost. The fee is credited against the work (up to 10% of the quote).

Book an inspection →
Free add-on

Free sump pit and discharge line with any full-perimeter underpin

A lowered basement needs somewhere for water to go. The pit, liner and discharge line are included in every full-perimeter job.

Claim this offer →
Free · No obligation

Get your personalized
estimate

These are general sump pump installation ranges. For an exact, itemized quote based on your home and scope, send us the basics and we'll take it from there.

Call (647) 254-0877
Free on-site estimateRegistered & WSIB coveredBBB Accredited Business10-year written warranty

Get your free estimate

Takes 30 seconds. No obligation.

🔒 We'll never share your info. One call, one estimator.