* TPO membrane on a single-level residential flat roof with clear access adjusted for Markham. Modified bitumen from $10/sq ft. Minimum project $3,000. Plus HST; permits at cost.
Markham's flat roofing market is primarily commercial, driven by the city's major technology campus developments and its extensive commercial corridors along Highway 7 and Warden Avenue. Companies like IBM, Huawei Canada, and numerous other tech firms operate large commercial buildings in Markham, many with flat TPO or EPDM roofs. The Highway 7 commercial strip has significant retail and restaurant inventory with flat roofs requiring regular maintenance and periodic replacement. Residential flat roofing in Markham is limited to rear additions on older homes in Milliken and Markham Village. Markham is well-served by commercial roofing contractors given its large commercial real estate base.
Headline range, permit info, and freshness date for flat roofing projects in Markham. Detailed scenarios are further down.
| Material | Cost per sq ft installed | Lifespan | Pros | Cons |
|---|---|---|---|---|
| Modified Bitumen (Mod-Bit) | From $10 per sq ft | 15–20 years |
|
|
| TPO (Thermoplastic Polyolefin) | From $8 per sq ft | 25–30 years |
|
|
| EPDM (Rubber Roofing) | $8 – $10 per sq ft | 20–30 years |
|
|
| Built-Up Roofing (BUR / Tar & Gravel) | $8 – $17 per sq ft | 20–30 years |
|
|
Ranges reflect typical GTA Q1 2026 rates and assume standard access. Every Buildoreno estimate is a free, itemized written quote.
Every project is different — these are the biggest factors that move your final number.
Flat roofs are measured by the square foot. Larger roofs benefit from economies of scale — the per-square-foot price often drops on roofs above 2,000 sq ft.
Vents, pipes, HVAC curbs, and drains all require custom flashing. Each penetration adds $150–$400 in labour and materials.
If water pools on your roof (ponding), we may need to add tapered insulation or scuppers. Drainage rework can add $1,000–$4,000.
Some municipalities limit the number of roofing layers. If a full tear-off is required, add $1.50–$3 per square foot for removal and disposal.
Ontario Building Code requires minimum R-values. If your insulation is below code, upgrading adds $2–$5 per square foot.
Multi-storey commercial buildings may require crane lifts for materials. Crane rental can add $1,000–$3,000 per day.
Permit requirements vary by municipality. Here's what to expect in Markham.
We handle the complete permit process on your behalf — application, drawings, and all required inspections.
Typical Markham pricing for common project sizes — our Mississauga base rates adjusted for Markham. Every Buildoreno estimate is free and itemized — these are for planning, not a contract. Plus HST; permits billed at cost.
Modified bitumen on a small single-storey addition. Simple job with good access and one drain.
TPO membrane replacement including removal of old mod-bit, insulation top-up to code, and new parapet flashing.
Two-ply modified bitumen with multiple HVAC penetrations and a rooftop unit curb. Includes tapered insulation for drainage.
EPDM rubber roof on a three-storey walk-up. Crane required for material lift. Includes full tear-off of existing BUR system.
Most Markham commercial properties require manufacturer-backed warranties of 15–20 years, third-party inspections, and compliance with Ontario Building Code energy requirements. We provide full documentation for property management companies.
These are general ranges. For an exact quote based on your Markham property, reach out — no cost, no obligation.