(647) 254-0877Get Estimate
Home/Cost Guides/Flat Roofing · Burlington
Cost Guide · Burlington · Updated March 2026

Flat Roof Cost in Burlington: 2026 Pricing Guide

Quick answer — Burlington starting price
From $8.25/sq ft
Most Burlington projects: $8,200 – $26,000+ · $8.25 – $17.50 per sq ft installed
About 3% above our Mississauga base rate: 3% for travel (20–40 km from Mississauga).
Get my Burlington price

* TPO membrane on a single-level residential flat roof with clear access adjusted for Burlington. Modified bitumen from $10/sq ft. Minimum project $3,000. Plus HST; permits at cost.

Burlington's flat roofing market spans its downtown commercial core, the Aldershot industrial area, and residential additions throughout the city's older neighbourhoods. Downtown Burlington's mixed-use Brant Street corridor has a concentration of flat-roofed commercial buildings, many of which are approaching the end of their original membrane lifespan. The waterfront's proximity to Lake Ontario creates elevated humidity and freeze-thaw loading for southern Burlington flat roofs, making proper membrane specification critical. Aldershot's light industrial zone has significant flat-roofed warehouse and commercial inventory. Burlington's Halton Region permit structure applies to all flat roofing work requiring permits.

Quick reference

Flat Roofing cost in Burlington, at a glance

Headline range, permit info, and freshness date for flat roofing projects in Burlington. Detailed scenarios are further down.

CityBurlington
ServiceFlat Roofing
Starting price in BurlingtonFrom $8.25/sq ft
Typical Burlington project range$8,200 – $26,000+
Typical unit cost$8.25 – $17.50 per sq ft installed
How Burlington pricing is setAbout 3% above our Mississauga base rate: 3% for travel (20–40 km from Mississauga).
Permit fees (billed at cost, not included)$170–$400 at City of Burlington Building Department
Permit authorityCity of Burlington Building Department (Halton Region)
Last updatedMarch 2026
Material options & pricing

What you'll pay by material

MaterialCost per sq ft installedLifespanProsCons
Modified Bitumen (Mod-Bit)From $10 per sq ft15–20 years
  • Proven, torch-applied two-ply system for residential flat roofs
  • Proven track record — been used reliably for decades
  • Torch-applied versions create excellent waterproof seams
  • Good puncture resistance for rooftop foot traffic
  • –Shorter lifespan than TPO or EPDM options
  • –Torch-applied installation requires extra fire precautions
  • –Dark surface absorbs more heat in summer
  • –Requires re-coating every 8–12 years to extend lifespan
TPO (Thermoplastic Polyolefin)From $8 per sq ft25–30 years
  • White reflective surface reduces cooling costs noticeably
  • Heat-welded seams create a chemically bonded, watertight seal
  • Excellent chemical resistance for commercial kitchens and restaurants
  • Low maintenance once installed properly
  • –Higher material and installation cost than mod-bit
  • –Requires specialized welding equipment and trained crews
  • –Can be punctured by sharp objects if not protected
  • –Quality varies widely between manufacturers — cheap TPO can fail early
EPDM (Rubber Roofing)$8 – $10 per sq ft20–30 years
  • Extremely flexible — handles building movement and temperature swings
  • Lightweight and easy on older building structures
  • Resistant to UV radiation, ozone, and harsh weather
  • Can be installed in large sheets, reducing the number of seams
  • –Seams are glued rather than welded — slightly higher leak risk over time
  • –Black surface absorbs heat unless coated with reflective paint
  • –Not ideal for roofs with heavy foot traffic
  • –Adhesives and seam tape can degrade in extreme cold if installed improperly
Built-Up Roofing (BUR / Tar & Gravel)$8 – $17 per sq ft20–30 years
  • Multi-layer construction provides built-in redundancy against leaks
  • Gravel ballast protects membrane from UV and foot traffic
  • Excellent for large commercial roofs with heavy equipment loads
  • Long track record — one of the oldest flat roofing systems still in use
  • –Heaviest flat roofing system — structure must support the weight
  • –Leak detection is difficult because water can travel between layers
  • –Installation produces strong fumes — not ideal near occupied spaces
  • –Most expensive option and slower to install

Ranges reflect typical GTA Q1 2026 rates and assume standard access. Every Buildoreno estimate is a free, itemized written quote.

What moves the needle

What affects the price?

Every project is different — these are the biggest factors that move your final number.

Roof Size

Flat roofs are measured by the square foot. Larger roofs benefit from economies of scale — the per-square-foot price often drops on roofs above 2,000 sq ft.

Number of Penetrations

Vents, pipes, HVAC curbs, and drains all require custom flashing. Each penetration adds $150–$400 in labour and materials.

Drainage Condition

If water pools on your roof (ponding), we may need to add tapered insulation or scuppers. Drainage rework can add $1,000–$4,000.

Existing Layers

Some municipalities limit the number of roofing layers. If a full tear-off is required, add $1.50–$3 per square foot for removal and disposal.

Insulation Upgrade

Ontario Building Code requires minimum R-values. If your insulation is below code, upgrading adds $2–$5 per square foot.

Access & Height

Multi-storey commercial buildings may require crane lifts for materials. Crane rental can add $1,000–$3,000 per day.

Don't forget these

Hidden costs to budget for

The line items homeowners most often forget — we itemize every one of these up front.

Structural Assessment (for heavy BUR systems)$500 – $1,500
Parapet Wall Capping & Flashing$1,000 – $3,500
Drain Replacement or Addition$500 – $1,500 per drain
Temporary Roof Protection (during phased install)$500 – $2,000
Building Permits$200 – $600
Permits & approvals

Building permits in Burlington

Permit requirements vary by municipality. Here's what to expect in Burlington.

Permit authorityCity of Burlington Building Department (Halton Region)
Typical permit fees$170–$400 at City of Burlington Building Department

We handle the complete permit process on your behalf — application, drawings, and all required inspections.

Recent Burlington projects

What common projects cost in Burlington

Typical Burlington pricing for common project sizes — our Mississauga base rates adjusted for Burlington. Every Buildoreno estimate is free and itemized — these are for planning, not a contract. Plus HST; permits billed at cost.

Residential Flat Roof Addition (400 sq ft)Burlington
$4,100 – $6,700

Modified bitumen on a small single-storey addition. Simple job with good access and one drain.

Townhouse Flat Roof (800 sq ft)Burlington
$8,200 – $13,500

TPO membrane replacement including removal of old mod-bit, insulation top-up to code, and new parapet flashing.

Commercial Retail (3,000 sq ft)Burlington
$18,500 – $31,000

Two-ply modified bitumen with multiple HVAC penetrations and a rooftop unit curb. Includes tapered insulation for drainage.

Multi-Unit Residential (2,000 sq ft)Burlington
$14,500 – $22,500

EPDM rubber roof on a three-storey walk-up. Crane required for material lift. Includes full tear-off of existing BUR system.

Reviewed by Patrick Grygoruk · Owner & Project Manager

25+ years in GTA exterior renovation · Ontario-registered contractor · WSIB-covered · permits managed for you. Meet the team

Honest answers

Flat Roofing in Burlington — questions answered

Waterfront properties experience more aggressive freeze-thaw cycling and higher average humidity than inland Burlington. Properly specified 60-mil TPO or EPDM in these locations should still achieve 20+ years with annual maintenance inspections.

Free · No obligation

Get your free Burlington estimate

These are general ranges. For an exact quote based on your Burlington property, reach out — no cost, no obligation.

Request a free estimate Call +1 647-254-0877
View our flat roofing work in Burlington