(647) 254-0877Get Estimate
Home/Blog/Roofing
Roofing

Aluminum vs Steel Metal Roofing in Ontario: Which Should Your Home Get?

By Patrick Grygoruk · Owner-Operator · 25+ years GTA constructionUpdated October 20268 min read
Get a free estimate Call (647) 254-0877
The short answer

For most Ontario homes, coated steel is the right metal roof: it costs $10–$18 per square foot installed in the GTA against $14–$22 for aluminum, it is stronger and more dent-resistant, and with a Galvalume or galvanized base and a quality paint system it lasts 40–60 years in our climate. Aluminum earns its premium where corrosion is the enemy — within a few kilometres of Lake Ontario, on very low-slope sections, or wherever salt spray and standing moisture are constant — because it cannot rust. Both outlast asphalt shingles two to three times over.

Key facts
  • Installed cost in the GTA: steel $10–$18 per sq ft; aluminum $14–$22; copper $22–$45+.
  • Lifespan: 40–60 years for coated steel, 50–70 for aluminum, with standing seam at the top of each range.
  • Steel is stronger and resists hail and foot-traffic dents; aluminum is softer and dents more easily.
  • Aluminum cannot rust, so it wins near the lake, on low slopes and where salt or constant moisture is present.
  • Both weigh less than asphalt shingles and far less than tile, so neither needs structural upgrades on a typical house.
  • Buildoreno backs either material with a 10-year written labour warranty on top of the manufacturer's finish warranty.

Side by side

Coated steelAluminum
Installed cost (GTA, 2026)$10–$18 per sq ft$14–$22 per sq ft
Typical lifespan40–60 years50–70 years
Rust / corrosionProtected by Galvalume or galvanized coating; cut edges and scratches are the riskCannot rust; forms its own protective oxide
Dent resistanceHigh — 26- or 24-gauge steel shrugs off hail and laddersLower — softer metal shows hail and foot traffic
Thermal movementModerateHigher — needs clips and details that allow more expansion
WeightAbout 1–1.5 lb per sq ftAbout 0.5–0.9 lb per sq ft
Best useMost GTA houses, steep and moderate slopes, hail-prone areasLakefront, low-slope sections, salt exposure, cottages

Cost: why aluminum is 25–40% more

Aluminum coil costs more per pound than steel and, because it is softer and moves more with temperature, standing-seam aluminum systems use thicker stock and more clips to stay flat and quiet. In the GTA that works out to $14–$22 per square foot installed for aluminum against $10–$18 for steel, including tear-off, deck repair, underlayment, flashing and the panels. On a typical 1,800 sq ft roof the difference is $7,000–$9,000. Metal shingle profiles are slightly less than standing seam in both materials.

Lifespan in Ontario's climate

Ontario roofs see 40 or more freeze-thaw cycles a winter, ice at the eaves, summer surface temperatures above 60 °C and, increasingly, hail. Both metals handle all of that far better than asphalt, which is why either one is routinely the last roof a house gets. The difference is how they fail at the margins. Steel's weakness is corrosion at scratches, cut edges and fastener penetrations once the coating is breached; that is managed with Galvalume (aluminum-zinc) or heavy galvanized substrates, factory-painted finishes and concealed-fastener systems, and it is why we quote 40–60 years for a properly installed steel roof. Aluminum's weakness is denting and thermal movement; it will never rust, which is why it reaches 50–70 years and is the default choice on lakefront and cottage roofs.

Manufacturers warrant the paint finish on both for 30–50 years. Buildoreno adds a 10-year written labour warranty on the installation, and we use synthetic underlayment and ice-and-water shield at eaves and valleys on every metal roof regardless of material.

Ask a contractor

Have a question about your roof?

Ask it here and get a straight answer from a contractor who installs and repairs roofs across the GTA. No site visit needed. We reply within 24 hours.

We reply to you directly and never share your details.

When steel is the right call

  • Most detached, semi-detached and townhouse roofs in Toronto, Mississauga, Brampton, Vaughan and Markham, where corrosion exposure is ordinary.
  • Hail-prone and high-traffic roofs (satellite installers, chimney sweeps, Christmas lights) — steel does not show the dents.
  • Budgets where the $7,000–$9,000 difference is better spent on standing seam over metal shingles, or on attic ventilation and insulation.
  • Dark colours and large uninterrupted panels, where aluminum's extra thermal movement is hardest to hide.

When aluminum is worth the premium

  • Within a few kilometres of Lake Ontario — Port Credit, the Beaches, Oakville's lakeshore, Burlington — where moist, salt-carrying air finds every scratch in a steel coating.
  • Low-slope sections and valleys that hold water or ice through the winter.
  • Cottages and waterfront properties in Muskoka and on Georgian Bay.
  • Anywhere the roof will be hard to inspect or touch up for decades.

Whichever metal you choose, the installation details matter more than the material. Concealed fasteners, correct clip spacing, proper underlayment and real flashing at every penetration are where 40-year roofs and 15-year roofs part ways.

A note on copper, zinc and 'stone-coated' steel

Copper ($22–$45+ per sq ft) and zinc are lifetime materials with distinctive patinas, chosen for appearance rather than economics. Stone-coated steel shingles are ordinary coated steel with a granular acrylic finish that mimics shake or tile; they cost about the same as painted metal shingles and perform the same, so pick them on looks.

Reviewed by Patrick Grygoruk

Owner-Operator at Buildoreno with 25+ years of hands-on GTA construction experience. Last reviewed October 2026.

Home/Blog/Aluminum vs Steel Metal Roofing in Ontario: Which Should Your Home Get?
Honest answers

Frequently asked questions

Not when it is a coated product — Galvalume or galvanized steel with a factory paint system — installed with concealed fasteners and properly sealed cut edges. Bare or scratched steel will. Cheap exposed-fastener agricultural panels are where the 'metal roofs rust' reputation comes from.

Aluminum, if you are using a metal system at all, because low slopes hold moisture. For slopes under about 3:12 we usually recommend a membrane — TPO, EPDM or modified bitumen — rather than metal of either kind.

No more than steel. Noise comes from panels fastened straight to purlins with no underlayment; a residential installation over a solid deck with underlayment and attic insulation is as quiet as asphalt. Both metals reflect more summer heat than asphalt and typically cut cooling costs by 10–25%.

Sometimes, with one layer of shingles in sound condition and a deck that passes inspection. We usually recommend a tear-off so the deck can be repaired and the underlayment and ice-and-water shield installed correctly; it adds $1.50–$3.00 per sq ft and removes the risk of trapping moisture under a 50-year roof.

Current offers
Prefer to talk? Call +1 647-254-0877
From $3,000

Metal roof package from $3,000

Exposed-fastener steel panels, new underlayment, ridge cap and flashing, installed by our own crew with a written workmanship warranty.

or about $64/mo†Financing coming soon

* Covers up to 460 sq ft at $6.50/sq ft on a single-storey, walkable roof. Larger or steeper roofs and standing seam profiles (snap-on from $12/sq ft, traditional from $16/sq ft) are priced from your free measure. Our minimum project is $3,000. Plus HST; permits billed at cost.

Price my roof →
Credited back

$400 roof inspection, credited back when you hire us

A full walk of the roof, attic and flashing with photos and a written report. $50 refundable deposit to book; the fee is credited against the work (up to 10% of the quote).

Book an inspection →
Free add-on

Free snow guards and eavestrough tune-up with any standing seam roof

Snow guards stop sheets of snow sliding off a slick metal roof onto your walkway. We include them, and reseal and realign your eavestroughs while we're up there.

Claim this offer →

† Illustrative monthly payment at 9.99% APR over 60 months, before HST. Financing is coming soon and subject to approval; terms may differ.

Free · No obligation

Steel or aluminum? Let's price both for your roof.

We measure the roof, look at its exposure and slope, and quote the system that fits — in writing, with the panel, gauge and finish spelled out. Free, no obligation, $0 down.

Call (647) 254-0877
Free on-site estimateRegistered & WSIB coveredBBB Accredited Business10-year written warranty

Get your free estimate

Takes 30 seconds. No obligation.

🔒 We'll never share your info. One call, one estimator.